TAPERED HSS END MILLS
Our 30 degree tapered end mills are made from premium grade high-speed steel and improve both machine time utilization and finish during the milling of draft angles and slotting of tapered walls. By reducing the need for multiple end mills to perform multiple processes, milling time is reduced and parts per tool are increased.
All 30 degree tapered end mills listed below are grouped by angle per side.
For quick access to all degrees of high speed steel tapered endmills, use the direct links below. Do not hesitate to call if you have any questions regarding our cutters or the use of a specific tapered end mill. 888.531.8500.
TAPERED END MILL – HIGH SPEED STEEL (HSS) – 30 DEGREES | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
ANGLE | DIAMETER | LENGTH | # OF FLUTES | UNCOATED* | |||||||||
PER SIDE | INCLUDED | TIP SIZE | LARGE END | SHANK | OF CUT | OVERALL | SQUARE END | ||||||
A | +0°30′ | D2 | +.002″ | D3 | D1 | L2 | +.100″ | L1 | PART # | EDP# | |||
-0°30′ | -.002″ | -.000″ | |||||||||||
30° | 60° | 0.0625 | 0.6399 | 1/2 | 0.500 | 0.500 | 2.500 | 3 | U-002A | – | |||
30° | 60° | 0.0625 | 0.6399 | 3/8 | 0.375 | 0.500 | 2.500 | 3 | U-002B | – | |||
30° | 60° | 0.0938 | 0.9598 | 1/2 | 0.500 | 0.750 | 2.750 | 3 | U-103 | – | |||
30° | 60° | 0.1250 | 0.7024 | 1/2 | 0.500 | 0.500 | 2.500 | 4 | U-202 | – | |||
30° | 60° | 0.1250 | 1.2797 | 5/8 | 0.625 | 1.000 | 3.125 | 4 | U-204A | – | |||
30° | 60° | 0.1250 | 1.2797 | 1/2 | 0.500 | 1.000 | 3.125 | 4 | U-204B | – | |||
30° | 60° | 0.2500 | 1.4047 | 3/4 | 0.750 | 1.000 | 3.500 | 4 | U-404 | – | |||
30° | 60° | 0.2500 | 1.9821 | 1 | 1.000 | 1.500 | 4.125 | 4 | U-406 | – | |||
30° | 60° | 0.3750 | 1.8184 | 1 | 1.000 | 1.250 | 4.000 | 4 | U-605 | – | |||
30° | 60° | 0.3750 | 2.1071 | 1 | 1.000 | 1.500 | 4.250 | 4 | U-606 | – | |||
30° | 60° | 0.5000 | 1.9434 | 1 | 1.000 | 1.250 | 4.000 | 4 | U-805 | – | |||
30° | 60° | 0.5000 | 2.2321 | 1 | 1.000 | 1.500 | 4.250 | 4 | U-806 | – |