TAPERED HSS END MILLS

Our 10 degree tapered end mills are made from premium grade high speed steel and improve both machine time utilization and finish during the milling of draft angles and slotting of tapered walls. By reducing the need for multiple end mills to perform multiple processes, milling time is reduced and parts per tool are increased.

All 10 degree tapered end mills listed below are grouped by angle per side.

For quick access to all degrees of high speed steel tapered endmills, use the direct links below. Do not hesitate to call if you have any questions regarding our cutters or the use of a specific tapered end mill. 888.531.8500.

TAPERED END MILL – HIGH SPEED STEEL, 10 DEGREES
ANGLE DIAMETER LENGTH # OF FLUTES UNCOATED*
PER SIDE TIP SIZE LARGE END SHANK OF CUT OVERALL
A + 0°30′ D1 +.002″ D3 D2 L2 + .100″ L1 PART # EDP #
– 0°30′ -.002″ – .000″
10.0° 1/32 0.0313 0.2957 3/8 0.375 3/4 0.750 2 7/8 2.875 3 J-0003
10.0° 1/16 0.0625 0.4152 3/8 0.375 1 1.000 2 7/8 2.875 3 J-004
10.0° 3/32 0.0938 0.2701 3/8 0.375 1/2 0.500 2 7/8 2.875 3 J-102
10.0° 3/32 0.0938 0.3582 3/8 0.375 3/4 0.750 2 7/8 2.875 3 J-103
10.0° 3/32 0.0938 0.6227 1/2 0.500 1 1/2 1.500 3 1/2 3.500 3 J-106
10.0° 1/8 0.1250 0.3895 1/2 0.500 3/4 0.750 2 7/8 2.875 3 J-203
10.0° 1/8 0.1250 0.5658 1/2 0.500 1 1/4 1.250 3 1/4 3.250 3 J-205
10.0° 1/8 0.1250 0.6540 1/2 0.500 1 1/2 1.500 3 5/8 3.625 3 J-206
10.0° 3/16 0.1875 0.6283 1/2 0.500 1 1/4 1.250 3 1/4 3.250 3 J-305
10.0° 3/16 0.1875 0.9810 3/4 0.750 2 1/4 2.250 4 1/2 4.500 3 J-309
10.0° 1/4 0.2500 0.5145 1/2 0.500 3/4 0.750 2 7/8 2.875 3 J-403
10.0° 1/4 0.2500 0.6908 1/2 0.500 1 1/4 1.250 3 1/4 3.250 3 J-405
10.0° 1/4 0.2500 1.0435 3/4 0.750 2 1/4 2.250 4 1/2 4.500 4 J-409
10.0° 1/4 0.2500 1.3961 1 1.000 3 1/4 3.250 5 3/4 5.750 4 J-413
10.0° 3/8 0.3750 0.8158 5/8 0.625 1 1/4 1.250 3 3/8 3.375 3 J-605
10.0° 3/8 0.3750 1.1685 1 1.000 2 1/4 2.250 4 5/8 4.625 3 J-609
10.0° 3/8 0.3750 1.5211 1 1/4 1.250 3 1/4 3.250 5 3/4 5.750 4 J-613
10.0° 1/2 0.5000 0.9408 3/4 0.750 1 1/4 1.250 3 1/2 3.500 3 J-805
10.0° 1/2 0.5000 1.2935 1 1.000 2 1/4 2.250 4 3/4 4.750 3 J-809
10.0° 1/2 0.5000 1.6461 1 1/4 1.250 3 1/4 3.250 5 3/4 5.750 4 J-813
10.0° 1/2 0.5000 1.9106 1 1/4 1.250 4 4.000 6 3/8 6.375 4 ʘ J-816

ʘ Indicates Center Hole in Tip

TAPERED END MILL – HIGH SPEED STEEL
1⁄2° 1 1⁄2°
10° 11° 12° 15° 20° 25° 30° 35° 40° 45°