HIGH SPEED STEEL TAPERED END MILLS

FEATURES & BENEFITS
Our Conical Tapered High Speed Steel end mills have many of the same characteristics of our carbide variety, but are available in significantly more configurations. They are the perfect choice for easy and medium to machine materials or applications with minor machining requirements. The Conical Tapered end mill was created by us in the 1940’s to reduce significant fixturing time, combine multiple operations into one and create parts that were previously impossible to machine. These tools are a household name and our quality has been tested time and time again.

RESULTS
Having the ability to cut setup time and eliminate costly programming, while maximizing production rates, may seem too good to be true. Our customers can testify to the fact that the Conical Tapered end mill does just that. A wide variety of configurations perform in finish milling of draft angles and slotting tapered walls, in most materials. Employing the three or four flute design facilitates chip disposal and maximizes feed rates, which brings your work closer to completion with every rotation of the tool.

For quick access to all degrees of high speed steel tapered end mills, use the direct links below. Do not hesitate to call if you have any questions regarding our end mills or their usage, 888.531.8500.

TAPERED END MILL – HIGH SPEED STEEL (HSS)
ANGLE DIAMETER LENGTH # OF FLUTES UNCOATED*
PER SIDE INCLUDED TIP SIZE LARGE END SHANK OF CUT OVERALL SQUARE END
A +0°30′ D2 +.002″ D3 D1 L2 +.100″ L1 PART # EDP#
-0°30′ -.002″ -.000″
0.5° 0.0625 0.0756 3/8 0.375 0.750 2.875 3 AX-003
0.5° 0.0938 0.1025 3/8 0.375 0.500 2.625 3 AX-102
0.5° 0.0938 0.1068 3/8 0.375 0.750 2.875 3 AX-103
0.5° 0.0938 0.1156 3/8 0.375 1.250 3.250 3 AX-105
0.5° 0.1250 0.1294 3/8 0.375 0.250 2.625 3 AX-201
0.5° 0.1250 0.1337 3/8 0.375 0.500 2.625 3 AX-202
0.5° 0.1250 0.1381 3/8 0.375 0.750 2.875 3 AX-203
0.5° 0.1250 0.1425 3/8 0.375 1.000 2.875 3 AX-204
0.5° 0.1250 0.1468 3/8 0.375 1.250 3.250 3 AX-205
0.5° 0.1250 0.1512 3/8 0.375 1.500 3.250 3 AX-206
0.5° 0.1875 0.2006 3/8 0.375 0.750 2.875 3 AX-303
0.5° 0.1875 0.2096 3/8 0.375 1.250 3.250 3 AX-305
0.5° 0.1875 0.2180 3/8 0.375 1.750 3.875 3 AX-307
0.5° 0.2500 0.2631 3/8 0.375 0.750 2.875 3 AX-403
0.5° 0.2500 0.2718 3/8 0.375 1.250 3.250 3 AX-405
0.5° 0.2500 0.2893 1/2 0.500 2.250 4.250 3 AX-409
0.5° 0.2500 0.3067 1/2 0.500 3.250 5.500 3 AX-413
0.5° 0.3750 0.3968 1/2 0.500 1.250 3.250 3 AX-605
0.5° 0.3750 0.4143 1/2 0.500 2.250 4.250 3 AX-609
0.5° 0.3750 0.4317 1/2 0.500 3.250 5.500 3 AX-613
0.5° 0.5000 0.5218 1/2 0.500 1.250 3.250 3 AX-805
0.5° 0.5000 0.5393 1/2 0.500 2.250 4.250 3 AX-809
0.5° 0.5000 0.5567 1/2 0.500 3.250 5.375 3 AX-813
0.5° 0.6250 0.6643 5/8 0.625 2.250 4.500 3 AX-1009
0.5° 0.6250 0.6817 5/8 0.625 3.250 5.500 3 AX-1013
0.5° 0.6250 0.6992 5/8 0.625 4.250 6.500 3 AX-1017
0.5° 0.7500 0.7893 3/4 0.7500 2.250 4.500 3 AX-1209
0.5° 0.7500 0.8067 3/4 0.7500 3.250 5.750 3 AX-1213
0.5° 0.7500 0.8155 3/4 0.7500 3.750 6.500 3 AX-1217
0.5° 0.7500 0.8416 3/4 0.7500 5.250 7.750 3 AX-1221
0.5° 1.0000 1.1047 1 1.000 6.000 8.500 4 AX-1624
0.0625 0.0887 3/8 0.375 0.750 2.875 3 A-003
0.0938 0.1112 3/8 0.375 0.500 2.625 3 A-102
0.0938 0.1199 3/8 0.375 0.750 2.875 3 A-103
0.0938 0.1374 3/8 0.375 1.250 3.125 3 A-105
0.0938 0.1461 3/8 0.375 1.500 3.375 3 A-106
0.1250 0.1337 3/8 0.375 0.250 2.625 3 A-201
0.1250 0.1425 3/8 0.375 0.500 2.625 3 A-202
0.1250 0.1512 3/8 0.375 0.750 2.875 3 A-203
0.1250 0.1599 3/8 0.375 1.000 2.875 3 A-204
0.1250 0.1686 3/8 0.375 1.250 3.250 3 A-205
0.1250 0.1774 3/8 0.375 1.500 3.250 3 A-206
0.1250 0.1948 3/8 0.375 2.000 4.000 3 A-208
0.1875 0.2137 3/8 0.375 0.750 2.875 3 A-303
0.1875 0.2311 3/8 0.375 1.250 3.250 3 A-305
0.1875 0.2573 3/8 0.375 2.000 4.000 3 A-308
0.2500 0.2762 3/8 0.375 0.750 2.875 3 A-403
0.2500 0.2936 3/8 0.375 1.250 3.250 3 A-405
0.2500 0.3285 1/2 0.500 2.250 4.125 3 A-409
0.2500 0.3634 1/2 0.500 3.250 5.500 3 A-413
0.3750 0.4186 1/2 0.500 1.250 3.250 3 A-605
0.3750 0.4535 1/2 0.500 2.250 4.250 3 A-609
0.3750 0.4884 1/2 0.500 3.250 5.500 3 A-613
0.5000 0.5436 1/2 0.500 1.250 3.250 3 A-805
0.5000 0.5785 1/2 0.500 2.250 4.250 3 A-809
0.5000 0.6134 1/2 0.500 3.250 5.500 3 A-813
0.6250 0.7035 5/8 0.625 2.250 4.500 3 A-1009
0.6250 0.7384 5/8 0.625 3.250 5.500 3 A-1013
0.6250 0.7733 5/8 0.625 4.250 6.500 3 A-1017
0.7500 0.8634 3/4 0.750 3.250 5.750 3 A-1213
0.7500 0.8984 3/4 0.750 4.250 6.875 3 A-1217
0.7500 0.9332 3/4 0.750 5.250 7.500 3 A-1221
1.0000 1.2094 1 1.000 6.000 8.500 4 A-1624
1.5° 0.0625 0.1018 3/8 0.375 0.750 2.875 3 AAX-003
1.5° 0.0938 0.1199 3/8 0.375 0.500 2.625 3 AAX-102
1.5° 0.0938 0.1330 3/8 0.375 0.750 2.875 3 AAX-103
1.5° 0.0938 0.1461 3/8 0.375 1.000 2.875 3 AAX-104
1.5° 0.0938 0.1592 3/8 0.375 1.250 3.250 3 AAX-105
1.5° 0.0938 0.1723 3/8 0.375 1.500 3.250 3 AAX-106
1.5° 0.1094 0.1617 3/8 0.375 1.000 2.875 3 AAX-154
1.5° 0.1094 0.1879 3/8 0.375 1.500 3.250 3 AAX-156
1.5° 0.1250 0.1512 3/8 0.375 0.500 2.625 3 AAX-202
1.5° 0.1250 0.1643 3/8 0.375 0.750 2.875 3 AAX-203
1.5° 0.1250 0.1774 3/8 0.375 1.000 2.875 3 AAX-204
1.5° 0.1250 0.1905 3/8 0.375 1.250 3.250 3 AAX-205
1.5° 0.1250 0.2035 3/8 0.375 1.500 3.250 3 AAX-206
1.5° 0.1250 0.2297 3/8 0.375 2.000 3.875 3 AAX-208
1.5° 0.1563 0.2086 3/8 0.375 1.000 2.875 3 AAX-254
1.5° 0.1563 0.2217 3/8 0.375 1.250 3.250 3 AAX-255
1.5° 0.1563 0.2348 3/8 0.375 1.500 3.250 3 AAX-256
1.5° 0.1875 0.2268 3/8 0.375 0.750 2.875 3 AAX-303
1.5° 0.1875 0.2530 3/8 0.375 1.250 3.250 3 AAX-305
1.5° 0.1875 0.2922 3/8 0.375 2.000 3.875 3 AAX-308
1.5° 0.1875 0.3053 3/8 0.375 2.250 4.250 3 AAX-309
1.5° 0.2500 0.2893 3/8 0.375 0.750 2.875 3 AAX-403
1.5° 0.2500 0.3155 3/8 0.375 1.250 3.250 3 AAX-405
1.5° 0.2500 0.3678 1/2 0.500 2.250 4.250 3 AAX-409
1.5° 0.2500 0.4202 1/2 0.500 3.250 5.500 3 AAX-413
1.5° 0.3750 0.4405 1/2 0.500 1.250 3.250 3 AAX-605
1.5° 0.3750 0.4928 1/2 0.500 2.250 4.250 3 AAX-609
1.5° 0.3750 0.5452 5/8 0.625 3.250 5.500 3 AAX-613
1.5° 0.5000 0.5655 1/2 0.500 1.250 3.250 3 AAX-805
1.5° 0.5000 0.6178 1/2 0.500 2.250 4.250 3 AAX-809
1.5° 0.5000 0.6702 5/8 0.625 3.250 5.500 3 AAX-813
1.5° 0.6250 0.7428 3/4 0.750 2.250 4.500 3 AAX-1009
1.5° 0.6250 0.7952 3/4 0.750 3.250 5.500 3 AAX-1013
1.5° 0.6250 0.8475 3/4 0.750 4.250 6.500 3 AAX-1017
1.5° 0.7500 0.8678 3/4 0.750 2.250 4.500 3 AAX-1209
1.5° 0.7500 1.0249 1 1.000 5.250 8.000 3 AAX-1221
1.5° 1.0000 1.3142 1 1/4 1.250 6.000 8.750 4 AAX-1624
0.0313 0.0662 3/8 0.375 0.500 2.625 3 B-0002
0.0313 0.0836 3/8 0.375 0.750 2.875 3 B-0003
0.0625 0.0974 3/8 0.375 0.500 2.625 3 B-002
0.0625 0.1323 3/8 0.375 1.000 2.875 3 B-004
0.0625 0.1498 3/8 0.375 1.250 3.250 3 B-005
0.0938 0.1287 3/8 0.375 0.500 2.625 3 B-102
0.0938 0.1461 3/8 0.375 0.750 2.875 3 B-103
0.0938 0.1636 3/8 0.375 1.000 2.875 3 B-104
0.0938 0.1811 3/8 0.375 1.250 3.250 3 B-105
0.0938 0.1985 3/8 0.375 1.500 3.500 3 B-106
0.1250 0.1599 3/8 0.375 0.500 2.625 3 B-202
0.1250 0.1774 3/8 0.375 0.750 2.875 3 B-203
0.1250 0.1948 3/8 0.375 1.000 2.875 3 B-204
0.1250 0.2123 3/8 0.375 1.250 3.000 3 B-205
0.1250 0.2298 3/8 0.375 1.500 3.250 3 B-206
0.1250 0.2647 3/8 0.375 2.000 3.875 3 B-208
0.1250 0.2996 1/2 0.500 2.500 4.750 3 B-210
0.1250 0.1774 3/8 0.375 0.750 2.875 3 B-303
0.1875 0.2748 3/8 0.375 1.250 3.250 3 B-305
0.1875 0.3272 3/8 0.375 2.000 3.875 3 B-308
0.1875 0.2399 3/8 0.375 0.750 2.875 3 B-403
0.2500 0.3373 3/8 0.375 1.250 3.250 3 B-405
0.2500 0.4071 1/2 0.500 2.250 4.250 3 B-409
0.2500 0.4770 1/2 0.500 3.250 5.500 3 B-413
0.3750 0.4623 1/2 0.500 1.250 3.250 3 B-605
0.3750 0.5321 1/2 0.500 2.250 4.250 3 B-609
0.3750 0.6020 5/8 0.625 3.250 5.500 3 B-613
0.5000 0.5873 1/2 0.500 1.250 3.250 3 B-805
0.5000 0.6571 1/2 0.500 2.250 4.250 3 B-809
0.5000 0.7270 5/8 0.625 3.250 5.500 3 B-813
0.6250 0.7821 3/4 0.750 2.250 4.500 3 B-1009
0.6250 0.8520 3/4 0.750 3.250 5.500 3 B-1013
0.6250 0.9218 3/4 0.750 4.250 6.500 3 B-1017
0.7500 0.9071 3/4 0.750 2.250 4.500 3 B-1209
0.7500 0.9770 1 1.000 3.250 6.000 3 B-1213
0.7500 1.1167 1 1.000 5.250 7.750 3 B-1221
1.0000 1.4190 1 1/4 1.250 6.000 8.500 4 B-1624
0.0313 0.0837 3/8 0.375 0.500 2.625 3 C-0002
0.0313 0.1099 3/8 0.375 0.750 2.875 3 C-0003
0.0625 0.1149 3/8 0.375 0.500 2.625 3 C-002
0.0625 0.1411 3/8 0.375 0.750 2.875 3 C-003
0.0625 0.1673 3/8 0.375 1.000 2.875 3 C-004
0.0625 0.2197 3/8 0.375 1.500 3.500 3 C-006
0.0938 0.1724 3/8 0.375 0.750 2.875 3 C-103
0.0938 0.1986 3/8 0.375 1.000 2.875 3 C-104
0.0938 0.2248 3/8 0.375 1.250 3.250 3 C-105
0.0938 0.2248 3/8 0.375 1.250 3.250 3 C-106
0.0938 0.3034 3/8 0.375 2.000 3.750 3 C-108
0.0938 0.3558 1/2 0.500 2.500 4.500 3 C-110
0.1094 0.2142 3/8 0.375 1.000 2.875 3 C-154
0.1094 0.2666 3/8 0.375 1.500 3.250 3 C-156
0.1094 0.3190 3/8 0.375 2.000 3.750 3 C-158
0.1250 0.2036 3/8 0.375 0.750 2.875 3 C-203
0.1250 0.2298 3/8 0.375 1.000 2.875 3 C-204
0.1250 0.2560 3/8 0.375 1.250 3.250 3 C-205
0.1250 0.2822 3/8 0.375 1.500 3.250 3 C-206
0.1250 0.3346 3/8 0.375 2.000 3.750 3 C-208
0.1250 0.3871 1/2 0.500 2.500 4.500 3 C-210
0.1563 0.2611 3/8 0.375 1.000 2.875 3 C-254
0.1563 0.3135 3/8 0.375 1.500 3.250 3 C-256
0.1563 0.3659 3/8 0.375 2.000 3.750 3 C-258
0.1875 0.2661 3/8 0.375 0.750 2.875 3 C-303
0.1875 0.3185 3/8 0.375 1.250 3.250 3 C-305
0.1875 0.3971 1/2 0.500 2.000 4.125 3 C-308
0.1875 0.4496 1/2 0.500 2.500 4.500 3 C-310
0.1875 0.5282 5/8 0.625 3.250 5.500 3 C-313
0.1875 0.6068 5/8 0.625 4.000 6.500 3 C-316
0.1875 0.7116 3/4 0.750 5.000 7.250 3 C-320
0.2500 0.3286 3/8 0.375 0.750 2.875 3 C-403
0.2500 0.3810 3/8 0.375 1.250 3.250 3 C-405
0.2500 0.4858 1/2 0.500 2.250 4.250 3 C-409
0.2500 0.5907 5/8 0.625 3.250 5.500 3 C-413
0.2500 0.6693 5/8 0.625 4.000 6.500 3 C-416
0.2500 0.7741 3/4 0.750 5.000 7.250 3 C-420
0.3750 0.5060 1/2 0.500 1.250 3.250 3 C-605
0.3750 0.6108 5/8 0.625 2.250 4.250 3 C-609
0.3750 0.7157 3/4 0.750 3.250 5.500 3 C-613
0.3750 0.7943 3/4 0.750 4.000 6.500 3 C-616
0.3750 0.8991 3/4 0.750 5.000 7.500 3 C-620
0.3750 1.0039 1 1.000 6.000 8.500 3 C-624
0.5000 0.6310 1/2 0.500 1.250 3.250 3 C-805
0.5000 0.7358 5/8 0.625 2.250 4.375 3 C-809
0.5000 0.8407 3/4 0.750 3.250 5.500 3 C-813
0.5000 0.9193 3/4 0.750 4.000 6.500 3 C-816
0.5000 1.0241 1 1.000 5.000 7.500 3 C-820
0.5000 1.1289 1 1.000 6.000 8.500 3 C-824
0.6250 0.6905 1 1.000 0.625 4.500 3 C-1009
0.6250 0.9657 1 1.000 3.250 5.500 3 C-1013
0.6250 1.0443 1 1.000 4.000 6.500 3 C-1016
0.6250 1.1491 1 1.000 5.000 7.500 3 C-1020
0.7500 0.9858 1 1.000 2.250 4.750 3 C-1209
0.7500 1.0907 1 1.000 3.250 5.750 3 C-1213
0.7500 1.1693 1 1.000 4.000 6.500 4 C-1216
0.7500 1.2741 1 1.000 5.000 7.500 4 C-1220
0.7500 1.3789 1 1/4 1.250 6.000 8.500 4 C-1224
1.0000 1.6289 1 1/4 1.250 6.000 8.500 4 C-1624
0.0313 0.1711 3/8 0.375 1.000 2.875 3 D-0004
0.0625 0.2024 3/8 0.375 1.000 2.875 3 D-004
0.0625 0.2723 3/8 0.375 1.500 3.250 3 D-006
0.0938 0.2336 3/8 0.375 1.000 2.875 3 D-104
0.1250 0.2299 3/8 0.375 0.750 2.875 3 D-203
0.1250 0.2649 3/8 0.375 1.000 2.875 3 D-204
0.1250 0.3348 3/8 0.375 1.500 3.250 3 D-206
0.1250 0.4047 1/2 0.500 2.000 3.875 3 D-208
0.1250 0.4747 1/2 0.500 2.500 4.500 3 D-210
0.1875 0.2924 3/8 0.375 0.750 2.875 3 D-303
0.1875 0.3623 3/8 0.375 1.250 3.250 3 D-305
0.1875 0.5372 1/2 0.500 2.500 4.500 3 D-310
0.1875 0.6420 5/8 0.625 3.250 5.500 3 D-313
0.1875 0.7469 3/4 0.750 4.000 6.500 3 D-316
0.2500 0.3549 3/8 0.375 0.750 2.875 3 D-403
0.2500 0.4248 1/2 0.500 1.250 3.250 3 D-405
0.2500 0.5647 5/8 0.625 2.250 4.500 3 D-409
0.2500 0.7045 3/4 0.750 3.250 5.625 3 D-413
0.2500 0.8094 3/4 0.750 4.000 6.500 3 D-416
0.3750 0.5498 1/2 0.500 1.250 3.250 3 D-605
0.3750 0.6897 5/8 0.625 2.250 4.250 3 D-609
0.3750 0.8295 3/4 0.750 3.250 5.500 3 D-613
0.3750 0.9344 3/4 0.750 4.000 6.500 3 D-616
0.5000 0.6748 1/2 0.500 1.250 3.250 3 D-805
0.5000 0.8147 3/4 0.750 2.250 4.500 3 D-809
0.5000 1.0594 1 1.000 4.000 6.500 3 D-816
0.5000 1.1993 1 1.000 5.000 7.500 3 D-820
10° 0.0313 0.1187 3/8 0.375 0.500 2.625 3 E-0002
10° 0.0313 0.1625 3/8 0.375 0.750 2.875 3 E-0003
10° 0.0625 0.1500 3/8 0.375 0.500 2.625 3 E-002
10° 0.0625 0.1937 3/8 0.375 0.750 2.875 3 E-003
10° 0.0625 0.2375 3/8 0.375 1.000 2.875 3 E-004
10° 0.0625 0.3250 3/8 0.375 1.500 3.250 3 E-006
10° 0.0938 0.1812 3/8 0.375 0.500 2.625 3 E-102
10° 0.0938 0.2250 3/8 0.375 0.750 2.875 3 E-103
10° 0.0938 0.2687 3/8 0.375 1.000 2.875 3 E-104
10° 0.0938 0.3125 3/8 0.375 1.250 3.250 3 E-105
10° 0.0938 0.3562 3/8 0.375 1.500 3.250 3 E-106
10° 0.0938 0.4437 1/2 0.500 2.000 3.875 3 E-108
10° 0.0938 0.5312 1/2 0.500 2.500 4.500 3 E-110
10° 0.1094 0.2844 3/8 0.375 1.000 2.875 3 E-154
10° 0.1094 0.3718 3/8 0.375 1.500 3.250 3 E-156
10° 0.1094 0.4593 1/2 0.500 2.000 3.875 3 E-158
10° 0.1250 0.2562 3/8 0.375 0.750 2.875 3 E-203
10° 0.1250 0.3000 3/8 0.375 1.000 2.875 3 E-204
10° 0.1250 0.3437 3/8 0.375 1.250 3.250 3 E-205
10° 0.1250 0.3875 3/8 0.375 1.500 3.250 3 E-206
10° 0.1250 0.4750 1/2 0.500 2.000 3.875 3 E-208
10° 0.1250 0.5625 1/2 0.500 2.500 4.500 3 E-210B
10° 0.1250 0.5625 5/8 0.625 2.500 4.750 3 E-210A
10° 0.1563 0.3312 3/8 0.375 1.000 2.875 3 E-254
10° 0.1563 0.3750 3/8 0.375 1.250 3.250 3 E-255
10° 0.1563 0.4187 1/2 0.500 1.500 3.625 3 E-256
10° 0.1563 0.5062 1/2 0.500 2.000 3.875 3 E-258
10° 0.1875 0.3187 3/8 0.375 0.750 2.875 3 E-303
10° 0.1875 0.4062 1/2 0.500 1.250 3.250 3 E-305
10° 0.1875 0.5375 1/2 0.500 2.000 4.125 3 E-308
10° 0.1875 0.6250 1/2 0.500 2.500 4.500 3 E-310B
10° 0.1875 0.6250 5/8 0.625 2.500 4.750 3 E-310A
10° 0.1875 0.7562 3/4 0.750 3.250 5.500 3 E-313
10° 0.1875 1.0624 3/4 0.750 5.000 6.500 3 E-316
10° 0.1875 1.0624 1 1.000 5.000 7.500 3 E-320
10° 0.1875 1.2374 1 1.000 6.000 8.500 3 E-324
10° 0.2500 0.3812 3/8 0.375 0.750 2.875 3 E-403
10° 0.2500 0.4587 1/2 0.500 1.250 3.250 3 E-405
10° 0.2500 0.6437 1/2 0.500 2.250 4.250 3 E-409B
10° 0.2500 0.6437 5/8 0.625 2.250 4.500 3 E-409A
10° 0.2500 0.8187 3/4 0.750 3.250 5.500 3 E-413
10° 0.2500 0.9499 3/4 0.750 4.000 6.500 3 E-416
10° 0.2500 1.2999 1 1.000 6.000 8.500 3 E-424
10° 0.3750 0.5937 1/2 0.500 1.250 3.250 3 E-605
10° 0.3750 0.7687 3/4 0.750 2.250 4.750 3 E-609
10° 0.3750 0.9437 3/4 0.750 3.250 5.500 3 E-613
10° 0.3750 1.0749 1 1.000 4.000 6.500 3 E-616
10° 0.3750 1.2499 1 1/4 1.250 5.000 7.250 3 E-620
10° 0.3750 1.4249 1 1/4 1.250 6.000 8.500 3 E-624
10° 0.5000 0.7487 1/2 0.500 1.250 3.250 3 E-805
10° 0.5000 0.8937 3/4 0.750 2.250 4.500 3 E-809
10° 0.5000 1.0687 1 1.000 3.250 6.000 3 E-813
10° 0.5000 1.1999 1 1.000 4.000 6.500 3 E-816
10° 0.5000 1.3749 1 1/4 1.250 5.000 7.500 3 E-820
10° 0.5000 1.5499 1 1/4 1.250 6.000 8.500 3 E-824
10° 0.6250 1.0187 3/4 0.750 2.250 4.500 3 E-1009
10° 0.6250 1.4999 1 1/4 1.250 5.000 7.500 4 E-1020
10° 0.7500 1.1437 3/4 0.750 2.250 4.750 3 E-1209
10° 0.7500 1.4499 1 1/4 1.250 4.000 6.500 4 E-1216
10° 0.7500 1.6249 1 1/4 1.250 5.000 7.750 4 E-1220
10° 0.7500 1.7999 1 1/4 1.250 6.000 8.750 4 E-1224
10° 1.0000 1.8749 1 1/4 1.250 5.000 7.750 4 E-1620
10° 1.0000 2.0499 2 2.000 6.000 9.500 4 E-1624
10° 1.5000 2.5499 2 2.000 6.000 9.500 4 E-2424
12° 0.0625 0.2727 3/8 0.375 1.000 2.875 3 F-004
12° 0.0938 0.3040 3/8 0.375 1.000 2.875 3 F-104
12° 0.1250 0.3352 3/8 0.375 1.000 2.875 3 F-204
12° 0.1250 0.4403 3/8 0.375 1.500 3.500 3 F-206
12° 0.2500 0.5653 1/2 0.500 1.500 3.500 3 F-406
12° 0.3750 0.6378 1/2 0.500 1.250 3.250 3 F-605
12° 0.5000 0.7628 5/8 0.625 1.250 3.250 3 F-805
14° 0.0313 0.2154 3/8 0.375 0.750 2.875 3 G-0003
14° 0.0625 0.3081 3/8 0.375 1.000 2.875 3 G-004
14° 0.0625 0.4308 1/2 0.500 1.500 3.375 3 G-006
14° 0.0938 0.3393 3/8 0.375 1.000 2.875 3 G-104
14° 0.0938 0.4621 1/2 0.500 1.500 3.375 3 G-106
14° 0.1250 0.3092 3/8 0.375 0.750 2.875 3 G-203
14° 0.1250 0.3706 3/8 0.375 1.000 2.875 3 G-204
14° 0.1250 0.4933 1/2 0.500 1.500 3.250 3 G-206
14° 0.1250 0.6161 5/8 0.625 2.000 4.125 3 G-208
14° 0.1250 0.8617 3/4 0.750 3.000 5.500 3 G-212
14° 0.1875 0.4845 1/2 0.500 1.250 3.125 3 G-305
14° 0.1875 0.9242 3/4 0.750 3.000 5.250 3 G-312
14° 0.2500 0.4342 1/2 0.500 0.750 3.000 3 G-403
14° 0.2500 0.5570 1/2 0.500 1.250 3.250 3 G-405
14° 0.2500 0.8025 3/4 0.750 2.250 4.500 3 G-409
14° 0.2500 1.0481 1 1.000 3.250 5.750 3 G-413
14° 0.2500 1.2322 1 1.000 4.000 6.500 3 G-416
14° 0.3125 1.1106 1 1.000 3.250 5.750 3 G-513
14° 0.3750 0.6802 5/8 0.625 1.250 3.500 3 G-605
14° 0.3750 0.9275 3/4 0.750 2.250 4.500 3 G-609
14° 0.3750 1.1731 1 1.000 3.250 53750 3 G-613
14° 0.3750 1.3572 1 1.000 4.000 6.500 3 G-616
14° 0.3750 1.8484 1 1/4 1.250 6.000 8.500 3 G-624
14° 0.5000 0.8070 5/8 0.625 1.250 3.375 3 G-805
14° 0.5000 1.0525 1 1.000 2.250 4.750 3 G-809
14° 0.5000 1.2981 1 1/4 1.250 3.250 5.750 3 G-813
14° 0.5000 1.4822 1 1/4 1.250 4.000 6.500 3 G-816
14° 0.5000 1.9734 1 1/4 1.250 6.000 8.500 3 G-824
14° 0.6250 1.6072 1 1/4 1.250 4.000 6.500 4 G-1016
14° 0.6250 1.8528 1 1/4 1.250 5.000 7.500 4 G-1020
14° 0.7500 1.5481 1 1/4 1.250 3.250 5.750 4 G-1213
14° 0.7500 1.7322 1 1/4 1.250 4.000 6.750 4 G-1216
14° 0.7500 2.2234 2 2.000 6.000 9.500 4 G-1224
14° 1.0000 2.4734 2 2.000 6.000 9.500 4 G-1624
14° 1.5000 2.9734 2 2.000 6.000 9.500 4 G-2424
16° 0.0313 0.1718 3/8 0.375 0.500 2.625 3 H-0002
16° 0.0625 0.2733 3/8 0.375 0.750 2.875 3 H-003
16° 0.0625 0.3436 3/8 0.375 1.00 2.875 3 H-004
16° 0.0625 0.4139 3/8 0.375 1.250 3.125 3 H-005
16° 0.0625 0.4841 3/8 0.375 1.500 3.500 3 H-006
16° 0.0938 0.3046 3/8 0.375 0.750 2.625 3 H-103
16° 0.0938 0.3748 3/8 0.375 1.000 2.875 3 H-104
16° 0.1250 0.3358 3/8 0.375 0.750 3.000 3 H-203
16° 0.1250 0.4061 3/8 0.375 1.000 3.000 3 H-204
16° 0.1250 0.6872 5/8 0.625 2.000 4.000 3 H-208
16° 0.2500 0.4608 1/2 0.500 0.750 2.875 3 H-403
16° 0.2500 0.8122 3/4 0.750 2.000 4.125 3 H-408
16° 0.3750 0.5858 1/2 0.500 0.750 2.750 3 H-603
16° 0.5000 0.7108 5/8 0.625 0.750 2.875 3 H-803
10° 20° 0.0313 0.2957 3/8 0.375 0.750 2.875 3 J-0003
10° 20° 0.0625 0.4152 3/8 0.375 1.000 2.875 3 J-004
10° 20° 0.0938 0.2701 3/8 0.375 0.500 2.625 3 J-102
10° 20° 0.0938 0.3582 3/8 0.375 0.750 2.875 3 J-103
10° 20° 0.0938 0.6227 1/2 0.500 1.500 3.500 3 J-106
10° 20° 0.1250 0.3895 3/8 0.375 0.750 2.875 3 J-203
10° 20° 0.1250 0.5658 1/2 0.500 1.250 3.250 3 J-205
10° 20° 0.1250 0.6540 1/2 0.500 1.500 3.625 3 J-206
10° 20° 0.1875 0.6283 1/2 0.500 1.250 3.250 3 J-305
10° 20° 0.1875 0.9810 3/4 0.750 2.250 4.500 3 J-309
10° 20° 0.2500 0.5145 1/2 0.500 0.750 2.875 3 J-403
10° 20° 0.2500 0.6908 1/2 0.500 1.250 3.250 3 J-405
10° 20° 0.2500 1.0435 3/4 0.750 2.250 4.500 4 J-409
10° 20° 0.2500 0.3961 1 1.000 3.250 5.750 4 J-413
10° 20° 0.3750 0.8158 5/8 0.625 1.250 3.500 3 J-605
10° 20° 0.3750 1.1685 1 1.000 2.250 4.625 3 J-609
10° 20° 0.3750 1.5211 1 1/4 1.250 3.250 4.750 4 J-613
10° 20° 0.5000 0.9408 3/4 0.750 1.250 3.500 3 J-805
10° 20° 0.5000 1.2935 1 1.000 2.250 4.750 3 J-809
10° 20° 0.5000 1.6461 1 1/4 1.250 3.250 6.000 4 J-813
10° 20° 0.5000 1.9106 1 1/4 1.250 4.000 6.500 4 J-816
11° 22° 0.0313 0.3228 3/8 0.375 0.750 2.875 3 K-0003
11° 22° 0.0625 0.3541 3/8 0.375 0.750 2.875 3 K-003
11° 22° 0.0625 0.4513 3/8 0.375 1.000 2.875 3 K-004
11° 22° 0.0938 0.3367 3/8 0.375 0.625 2.875 3 K-103
12° 24° 0.0938 0.4126 3/8 0.375 0.750 2.875 3 L-103
12° 24° 0.1250 0.6564 1/2 0.500 1.250 3.125 3 L-205
12° 24° 0.2500 0.8877 5/8 0.625 1.500 3.625 3 L-406
12° 24° 0.2500 1.2065 1 1.000 2.250 4.500 4 L-409
13° 26° 0.2500 1.7506 1 1/4 1.250 3.250 5.750 4 M-413
15° 30° 0.0313 0.4334 1/2 0.500 0.750 2.750 3 P-0003
15° 30° 0.0625 0.4644 1/2 0.500 0.750 2.750 3 P-003
15° 30° 0.0938 0.4957 1/2 0.500 0.750 2.750 3 P-103
15° 30° 0.0938 0.8976 3/4 0.750 1.500 3.750 3 P-106
15° 30° 0.1250 0.3930 3/8 0.375 0.500 2.875 3 P-202
15° 30° 0.1250 0.6609 1/2 0.500 1.000 3.000 3 P-204
15° 30° 0.1875 0.7234 1/2 0.500 1.000 3.000 3 P-304
15° 30° 0.1875 0.8574 3/4 0.750 1.250 3.500 4 P-305
15° 30° 0.1875 0.1.2593 1 1.000 2.000 4.500 3 P-308
15° 30° 0.2500 0.7859 1/2 0.500 1.000 3.000 4 P-404
15° 30° 0.2500 1.0539 3/4 0.750 1.500 3.750 4 P-406
15° 30° 0.2500 1.4558 1 1.000 2.250 4.750 4 P-409
15° 30° 0.2500 1.9917 1 1/4 1.250 3.250 5.750 4 P-413
15° 30° 0.3125 0.8484 3/4 0.750 1.000 3.250 4 P-504
15° 30° 0.3125 1.1164 3/4 0.750 1.500 3.750 4 P-506
15° 30° 0.3750 1.0449 3/4 0.750 1.250 3.625 4 P-605
15° 30° 0.3750 1.5808 1 1/4 1.250 2.250 4.750 4 P-609
15° 30° 0.5000 1.1699 3/4 0.750 1.250 3.500 4 P-805
15° 30° 0.5000 1.4378 1 1.000 1.750 4.250 4 P-807
15° 30° 0.5000 1.7058 1 1/4 1.250 2.250 4.750 4 P-809
15° 30° 0.5000 2.2417 1 1/4 1.250 3.250 6.000 4 P-813
20° 40° 0.0313 0.3952 3/8 0.375 0.500 2.500 3 T-0002
20° 40° 0.0625 0.4265 3/8 0.375 0.500 2.500 3 T-002
20° 40° 0.0938 0.6397 1/2 0.500 0.750 2.750 3 T-103
20° 40° 0.1250 0.4890 3/8 0.375 0.500 2.500 3 T-202
20° 40° 0.1250 0.8529 1/2 0.500 1.000 3.000 4 T-204
20° 40° 0.1875 0.9154 1/2 0.500 1.000 3.000 4 T-304
20° 40° 0.2500 0.9779 1/2 0.500 1.000 3.000 4 T-404
20° 40° 0.2500 1.3419 3/4 0.750 1.500 4.000 4 T-406
20° 40° 0.3125 1.0404 3/4 0.750 1.000 3.375 4 T-504
20° 40° 0.3125 1.4044 3/4 0.750 1.500 3.500 4 T-506
20° 40° 0.3750 1.4669 3/4 0.750 1.500 4.000 4 T-606
20° 40° 0.3750 1.8309 1 1.000 2.000 4.500 4 T-608
20° 40° 0.5000 2.1379 1 1/4 1.250 2.250 4.750 4 T-809
25° 50° 0.0938 0.7932 1/2 0.500 0.750 3.000 3 R-103
25° 50° 0.1250 0.5913 1/2 0.500 0.500 2.500 3 R-202
25° 50° 0.1250 1.0576 5/8 0.625 1.000 3.000 4 R-204
25° 50° 0.2500 1.1826 5/8 0.625 1.000 3.250 4 R-404
25° 50° 0.2500 1.6489 3/4 0.750 1.500 3.750 4 R-406
25° 50° 0.3125 1.0120 5/8 0.625 0.750 3.000 4 R-503
25° 50° 0.3125 1.2451 3/4 0.750 1.000 3.500 4 R-504
25° 50° 0.3125 17114 1 1.000 1.500 4.000 4 R-506
25° 50° 0.3750 1.0745 5/8 0.625 0.750 3.000 4 R-603
25° 50° 0.3750 1.3076 3/4 0.750 1.000 3.250 4 R-604
25° 50° 0.3750 1.7739 1 1.000 1.500 4.000 4 R-606
25° 50° 0.5000 1.6658 1 1.000 1.250 3.750 4 R-805
30° 60° 0.0625 0.6399 1/2 0.500 0.500 2.500 3 U-002A
30° 60° 0.0625 0.6399 3/8 0.375 0.500 2.500 3 U-002B
30° 60° 0.0938 0.9598 1/2 0.500 0.750 2.750 3 U-103
30° 60° 0.1250 0.7024 1/2 0.500 0.500 2.500 4 U-202
30° 60° 0.1250 1.2797 5/8 0.625 1.000 3.125 4 U-204A
30° 60° 0.1250 1.2797 1/2 0.500 1.000 3.125 4 U-204B
30° 60° 0.2500 1.4047 3/4 0.750 1.000 3.500 4 U-404
30° 60° 0.2500 1.9821 1 1.000 1.500 4.125 4 U-406
30° 60° 0.3750 1.8184 1 1.000 1.250 4.000 4 U-605
30° 60° 0.3750 2.1071 1 1.000 1.500 4.250 4 U-606
30° 60° 0.5000 1.9434 1 1.000 1.250 4.000 4 U-805
30° 60° 0.5000 2.2321 1 1.000 1.500 4.250 4 U-806
35° 70° 0.1250 1.1753 1/2 0.500 0.750 3.000 4 V-203
35° 70° 0.2500 1.6504 1 1.000 1.000 3.250 4 V-404
40° 80° 0.1250 1.8030 1 1.000 1.000 3.625 4 X-204
40° 80° 0.2500 1.9280 1 1.000 1.000 3.625 4 X-404
45° 90° 0.1250 0.7500 1/2 0.500 0.313 2.625 4 WA-215
45° 90° 0.1250 0.7500 1/2 0.500 0.313 2.625 4 WA-215SP
45° 90° 0.1250 1.6250 5/8 0.625 0.750 3.250 4 WA-203
45° 90° 0.1250 1.6250 5/8 0.625 0.750 3.250 4 WA-203SP
45° 90° 0.1250 2.1250 3/4 0.750 1.000 3.750 4 WA-204B
45° 90° 0.1250 2.1250 3/4 0.750 1.000 3.750 4 WA-204BSP
45° 90° 0.1250 2.1250 1 1.000 1.000 3.750 4 WA-204A
45° 90° 0.1250 2.1250 1 1.000 1.000 3.750 4 WA-204ASP
TAPERED END MILL – HIGH SPEED STEEL
1⁄2° 1 1⁄2°
10° 11° 12° 15° 20° 25° 30° 35° 40° 45°


PRODUCTION ENHANCEMENTS

Proper tool setup and selection can improve your running parts by nearly 3 fold. Rather than using a 7 multi-axis machine and substantial programming time to cut a draft angle, the use of our tapered end mills were able to improve the finish and dramatically increase production results.