TAPERED HSS LHS END MILLS

For quick access to all degrees of high speed steel tapered end mills, use the direct links below. Do not hesitate to call if you have any questions regarding our end mills or their usage, 888.531.8500.

TAPERED CARBIDE – HIGH SPEED STEEL, LEFT HAND SPIRAL (HSS LHS) – 5 DEGREES
ANGLE DIAMETER LENGTH # OF FLUTES UNCOATED*
PER SIDE INCLUDED TIP SIZE LARGE END SHANK OF CUT OVERALL SQUARE END
A +0°30′ D2 +.002″ D3 D1 L2 +.100″ L1 PART # EDP#
-0°30′ -.002″ -.000″
10° 0.0938 0.2687 3/8 0.375 1.000 3.250 3 LE-104
10° 0.0938 0.3562 3/8 0.375 1.500 3.750 3 LE-106
10° 0.0938 0.4437 1/2 0.500 2.000 4.250 3 LE-108
10° 0.1250 0.3000 3/8 0.375 1.000 3.250 3 LE-204
10° 0.1250 0.3875 3/8 0.375 1.500 3.750 3 LE-206
10° 0.1250 0.4750 1/2 0.500 2.000 4.250 3 LE-208
10° 0.1250 0.5624 1/2 0.500 2.500 5.000 3 LE-210
10° 0.1250 0.6499 5/8 0.625 3.000 5.750 3 LE-212
10° 0.1875 0.4500 1/2 0.500 1.500 3.750 4 LE-306
10° 0.1875 0.4375 1/2 0.500 2.000 4.375 4 LE-308
10° 0.2500 0.5125 1/2 0.500 1.500 4.000 4 LE-406
10° 0.2500 0.6437 5/8 0.625 2.250 5.250 4 LE-409
10° 0.2500 0.9499 3/4 0.750 4.000 7.000 4 LE-416
TAPERED END MILL – HIGH SPEED STEEL – LEFT HAND SPIRAL
1 1⁄2°