CARBIDE RUNNER CUTTER END MILLS – 15 DEGREES
ANGLE DIAMETER LENGTH # OF FLUTES ALTIN COATED
PER SIDE INCLUDED TIP SIZE LARGE END SHANK OF CUT OVERALL
A +0°30′ D2 +.002″ D3 D1 L2 +.100″ L1 PART # EDP#
-0°30′ -.002″ -.000″
15° 30° 0.0625 3/16 0.188 0.261 2.000 2 RCP-001
15° 30° 0.0938 3/16 0.188 0.216 2.000 2 RCP-101
15° 30° 0.1250 1/4 0.250 0.288 2.500 2 RCP-201
15° 30° 0.1563 1/4 0.250 0.243 2.500 2 RCP-251
15° 30° 0.1875 5/16 0.313 0.314 2.500 2 RCP-301
15° 30° 0.2188 5/16 0.313 0.271 2.500 2 RCP-351
15° 30° 0.2500 3/8 0.375 0.342 2.500 2 RCP-401
15° 30° 0.3125 1/2 0.500 0.490 3.000 2 RCP-501
CARBIDE RUNNER CUTTER END MILLS
10° 15° 20°

PRODUCTION ENHANCEMENTS

Proper tool setup and selection can improve your running parts by nearly 3 fold. Rather than using a 7 multi-axis machine and substantial programming time to cut a draft angle, the use of our tapered end mills were able to improve the finish and dramatically increase production results.